Boats, Kayaks & Boating Equipment › Motor › minn kota

G-Force Eliminator Trolling Motor Prop Nut for Minn Kota 80-101-112 Trolling Motor Black

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better longer and quieter. Designed to lessen prop noise and vibration The ELIMINATOR Prop Nut stabilizes... more

VMAX MR96-60 12V 60Ah AGM Deep Cycle Battery for Minn Kota Edge 55 - Latch & Door - Hand/Foot Control 12V 55lb Trolling Motor

ESTIMATED RUN TIME: The MR96 will power a 55lb motor continuously for: 5.5 hours at low speed 3.3 hours at medium and 1 hours at max speed more

12V 35AH SLA Replacement Battery compatible with Minn Kota Endura C2 - Trolling Motor

Delivering power when you need it the Mighty Max ML35-12 12 Volt 35 AH uses a state of the art heavy-duty calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications. The ML35-12 is an Absorbent Glass... more

Minn Kota Trolling Motor Part - SEAL O-RING KIT 112# - 2881450

Fits all 112# thrust Minn Kota trolling motors that have a 4-1/2 outside diameter lower unit. Please measure the outside diameter of your motor to ensure this kit will fit. All Parts Are Original Kit Contains; 2 - 701-009 Thru Bolt O Ring 1 - 701-103 O... more

Minn Kota Trolling Motor Part - 4 SEAL-ORING KIT - 2889460

Minn Kota Seal Kit for Motors with a 4 Outside Diameter Lower Unit Fits all Minn Kota trolling motor models that have 74 - 101 lbs of thrust All Parts Are Original Kit Contains; 2 - 701-009 Thru Bolt O Ring 2 - 701-043 O Ring 2 - 880-025 Prop Shaft... more

For Minn Kota 80 101 112 T-H Marine 1x Red Eliminator Trolling Motor Prop NutUS

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

ELIMINATOR Trolling Motor Prop Nut For Minn Kota 80 101 T-H Marine

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

Minn Kota 1358967 Riptide Ulterra Salt Water Trolling Motor

Stow deploy trim and operate your motor from anywhere on the boat. It s not magic but it s close. Riptide Ulterra features Auto Stow/Deploy and Power Trim and comes with i-Pilot. Fish from anywhere. Dominate everywhere. Nothing makes fishing easier... more

Minn Kota Ultrex Fresh Water Trolling Motor with i-Pilot-Link and Built-In MDI Transducer 112 Pound Trust 52 Shaft 36 Volts

The Ultrex gives you the control of a Fortrex plus all the capabilities of i-Pilot or i-Pilot Link. Get ultra-responsive comfortable Power Steering with GPS-powered tools like Spot-Lock and change the way you fish forever. Cable steer control with... more

VMAX MR96-60 12V 60Ah AGM Deep Cycle Battery for Minn Kota Endura C2 55 Freshwater Transom 12V 55lb Trolling Motor

ESTIMATED RUN TIME: The MR96 will power a 55lb motor continuously for: 5.5 hours at low speed 3.3 hours at medium and 1 hours at max speed more

Minn Kota Trolling Motor Part - 3 5/8 SEAL ORING KIT - 2888460

Fits Minn Kota trolling motor models that have a 3-5/8 Outside Diameter Lower Unit. Please measure the outide diameter of your lower unit to ensure this seal kit will fit your motor. Typically fits Minn Kota motors with 46 - 70 pounds of thrust All... more

Minn Kota 1352278 Endura C2 50-42 Freshwater Transom Mount Trolling Motor with Battery Meter

If the Enduraâ„¢ name looks familiar it s because you ve seen it on thousands of transoms over the years. The most popular trolling motor on the water is built to explore built to last and trusted to reliably consistently drive you to the fish. This... more

Eliminator Trolling Motor Prop Nut for Minn Kota 80 101 112 For T-H Marine

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

Fit T-H Marine Eliminator Trolling Motor Prop Nut GFEL-MK Minn Kota 80 101 112

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

Minn Kota Ulterra Trolling Motor 72 shaft /112lb thrust w/i-Pilot Link/MDI

Only Ulterra features Auto Stow/Deploy and Power Trim as well as your choice of i-Pilot or i-Pilot Link and a multi-function foot pedal. You can stow deploy and trim Ulterra from the remote or the foot pedal meaning you never have to touch your motor... more

Minn Kota 1355947 Edge 45 Bow-Mount L&D Freshwater Trolling Motor 45 Shaft 45 lb. Thrust 12V

Sleek modern look. Equipped with a highly responsive cable steered foot pedal for ultimate control. Tempered marine-grade extruded aluminum mount is both super strong and light weight. Easy-to-read directional indicator is built in to the top of the... more

QTY3 VMAX MR147-155 12V 155AH AGM Deep Cycle Batteries for Minn Kota Terrova 112/US2 Freshwater 36V 112lbs Trolling Motor

Three 12 Volt 155ah High Performance Marine AGM Deep Cycle Batteries more

Minn Kota Powerdrive V2 Battery Upgrade 12V Vmax XTR31-135 12V AGM Trolling Motor

12 Volt 135Ah AGM Battery; Dimensions: 13 Lx 6.8 Wx8.7 H; Includes 8mm terminal posts; Reserve Capacity of 265 minutes. Maintenance Free Operation. The Vmaxtanks XTR31-135 is an Extreme Series 12V 135AH Deep Cycle AGM Battery. Sealed Construction The... more

T-H Marine G-Force Grass Goat Trolling Motor Weed Guard f/Minn Kota Large - Fortrex 112-Ultrex 80-112

T-H Marine G-Force Grass Goat Trolling Motor Weed Guard f/Minn Kota Large - Fortrex 112-Ultrex 80-112 T-H MARINE G FORCE GRASS GOAT FOR MINN KOTA LARGE- FORTREX more

Minn Kota Trolling Motor Part – Terrova and Riptide Terrova Depth Collar Assembly - 2771505

Fits Minn Kota Terrova and Riptide Terrova Models from 2017 - Present. These models will be equipped with lift assist. If your model is not equipped with lift assist you will need p/n 2771500. Replaces 2321505 No Returns Or Exchanges On Any Electronic... more

Minn Kota Trolling Motor Part - 4.75 E-DRIVE BRUSH KIT (2 BRUSHES) - 2 X 188-096

Sold In Quantity Of 2 - YOU WILL RECEIVE 2 BRUSHES If you are unsure if the brush fits your motor please check your owner s manual or contact us. No Returns Or Exchanges On Any Electronic Parts Boards Or Switches. NO EXCEPTIONS more

Minn Kota Terrova 80/24V Trolling Motor Banshee 24V 100Ah LiFePO4 Battery

Banshee s 24V 100Ah LifePO4 lithium battery is the best choice for having the power you need wherever life takes you. With 2x the power of regular lead acid batteries 40% of the weight and more than 4x the recharges (>3000 cycles) this battery is an... more

Minn Kota Edge L&D Trolling Motor

Don t let the size fool you. Edge s compact mount is built with extruded anodized aluminum for rugged no-nonsense strength. Add a rock-solid Latch & Door mount and an impact resistant composite head and you have a motor that s perfect for smaller boats... more

Johnson Outdoors Minn Kota Riptide ST 80 Pound 24V 54 inch Trolling Motor Shaft #2777026

This is the lower unit with the shaft pressed into it. It is fully assembled with the wires hooked up in the lower unit and running up the shaft. All you will have to do is take yours apart and slide the new one into your bow mount hook up the two... more

Minn Kota 2774725 or 2994728 V2 Bulk PowerDrive Corded Foot Pedal for Boat trolling Motor

This foot pedal will work with all PowerDrive Power Drive V2 Auto Pilot V2 Riptide SP and Riptide PowerDrive models from 2007 - Present that use the round plug. If your foot pedal plug looks like the one in the picture this foot pedal will work with... more

VLYNX VCB60A Minn Kota Comp 24V Trolling Motor Resettable Fuse Circuit Breaker

High Quality Waterproof Marine Grade 60 Amp Circuit Breaker more

T-H Marine Supplies G-Force Eliminator Trolling Motor Prop Nut for Minn Kota 35-70 Trolling Motor Black

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better longer and quieter. Designed to lessen prop noise and vibration The ELIMINATOR Prop Nut stabilizes... more

Minn Kota Endura Max 45 Trolling Motor - Transom Mount - 12V - 45lb - 36

Endura Max 45 Trolling Motor - Transom Mount - 12V - 45lb - 36 Endura is trusted worldwide as the most durable reliable and hard-working transom-mount motor on the water. And Endura Max takes that legacy to a new level adding the Digital Maximizer to... more

QTY4 VMAX MR137-120 12V 120AH AGM Deep Cycle Group 31 Batteries for Minn Kota E-Drive - Electric Outboard - 2Hp - 48V 48 Volt Trolling Motor

Four 12 Volt 120ah Group 31 High Performance Marine AGM Deep Cycle Batteries more

VLYNX VCB200 Minn Kota Comp Trolling Motor 200A Resettable Fuse Circuit Breaker

High Quality Waterproof Marine Grade 200 Amp Circuit Breaker more

Bob s Machine 312-100008 Prop Nut for Minn Kota Trolling Motors with 70 Lbs. or Less Thrust Carbon Fiber Boat Accessories

Bob s Machine Prop Nuts require no tools when removing your trolling motor propeller making it easier to clean fishing lines and weeds or change propellers on the water. They feature over 25% more mass than most other units creating a quieter troll.... more

For Minn Kota 80 101 and 112 T-H Marine Eliminator Trolling Motor Prop Nut Hot

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

GFELMKWDP G-Force Eliminator White Aluminum Trolling Motor Propeller Nut for Minn Kota

G-Force Eliminator White Aluminum Trolling Motor Propeller Nut for Minn Kota 80-112 lbs Thrust Motors (GFEL-MK-W-DP) by T-H Marine. The Eliminator Prop Nut is built to make your trolling motor perform better longer and quieter. Designed to lessen prop... more

T-H Marine G-Force Eliminator Trolling Motor Prop Nut - Minn Kota 80 101 and 112

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

For T-H Marine Minn Kota 80 101 112 Eliminator Trolling Motor Prop Nut

Fitment: Works for MinnKota 80 101 and 112 (NOTE: Will not work with Kipawa and Hydrilla Hacker Props.) Feature: -- Machined from Billet Aluminum -- O-ring dampens noise/vibration and secures nut -- Wider contact area for a more stable prop -- Cooling... more

Minn Kota Powerdrive 48 Replacement Trolling Motor Shaft PN# 2032075

Minn Kota Powerdrive 48 Replacement Trolling Motor Shaft PN# 2032075Fits all Powerdrive electric steer motors more

QTY2 VMAX MR137-120 12V 120AH AGM Deep Cycle Group 31 Batteries for Minn Kota Fortrex 80/US2 Bow-Mount 24V 80lb Trolling Motor

Two 12 Volt 120ah Group 31 High Performance Marine AGM Deep Cycle Batteries more

QTY2 VMAX MR107-85 12V 85AH AGM Deep Cycle Group 24 Batteries for Minn Kota Maxxum 80/BG Freshwater Bow-Mount 24V 80lb Trolling Motor

Two 12 Volt 85ah Group 24 High Performance Marine AGM Deep Cycle Batteries more